How to edge your lawn – 10 easy tips

Alan Titchmarsh on how to prepare lawn for seeding and turfing

When you subscribe we will use the information you provide to send you these newsletters. Sometimes they’ll include recommendations for other related newsletters or services we offer. Our Privacy Notice explains more about how we use your data, and your rights. You can unsubscribe at any time.

Garden edging is an important step to making gardens look beautiful and elegant. Mowing your grass is the first step in making your green grass look great – but edging this area will help to create a fresh and flawless finish. has compiled 10 tips to help you edge your lawn perfectly.

Lawn edging is the gardening process of creating distinct lines which mark the edge of your lawn.

Overgrown lawn edges can look unsightly and untidy.

For a professional finish, you should re-cut the edges of your lawn each year and trim overhanging grass after mowing.

Edging should take place during the mowing season which runs from June to August when the weather is dry enough to cut your lawn.

The first step to edge your lawn is to mow your lawn.

You need to mow your lawn so you can work out how short or tall your grass should be along the edges of the lawn.

You should not cut your grass too low because this can lead to bare patches and weak grassroots.

The next step is to delineate your planned path with a tape, hose or rope to ensure the edging cuts.

If you are edging your lawn along a path, you can skip this step.

Power edgers, like string trimmers, will help you to edge your lawn much faster.

Manual edges help to give you more control.

The next step when using your edgers is to make sure to put on safety gear.

Wear a pair of gloves, safety glasses and a face mask to protect your eyes, nose and mouth.

How to get rid of wasps in the garden – 5 effective deterrents [INSIGHT]
Gardeners’ World: Adam Frost shares gardening ‘jobs’ to tackle now [PICTURES]
16 best heavy-duty, waterproof garden furniture covers in the UK [EXPLAINER]

Before you begin the edging process, you should edge the perimeter.

This will help you to get familiar with your edger.

With a string trimmer, you should walk on the hard surface behind the edge and keep your arms straight to keep it level.

For manual edgers, drive it straight down into the ground so the lip at the bottom touches soil and then rock it side-to-side, gently pulling the handle back up.

Shovel up loose soil, turf or mulch periodically as you go along and place it in a wheelbarrow.

You should be able to get a good sense of edging as you progress.

Make sure to check for jagged areas as you go along.

The next step is to edge garden beds by following the same process along the bed.

Once the perimeter and curved pathways are taken care of, you should take your edging shears and prune your shrubs and bushes.

Proceed in small, regular sections which will help you to keep shapes even.

After you have completed the process, use a stiff brush to clean all grass, soil and residue from your strimmer, edger or edging shears.

The final step is to maintain your lawn by edging regularly.

Source: Read Full Article

You May Also Like